There may be instances when you find the need to drain your swimming pool. These instances may happen when the water was not changed for a very long time. This may also be necessary before winter season comes or you simply want to maintain your pool yourself. When you are in this situation, you may want to know the steps in draining water from your swimming pool. When the total dissolved solids or TDS level of your pool reaches a point where the floor and walls of the pool already have mineral stains, it may cause the surface to deteriorate. This high TDS will not be reduced if the water from your swimming pool is not drained. There are some areas where it is necessary for swimming pool owners to drain the water to ensure their cleanliness. The same thing goes in areas affected by winter since the water will freeze, which can damage the pipes and surface of the swimming pool. You will learn how you can use a garden hose and the pool pump to drain your swimming pool in this article.
The following are some tips in draining your swimming pool:
Always be careful and be aware that the following situations may require the assistance of professionals:
- When the area where you live has high ground water.
- When you have no knowledge about the type of swimming pool you have.
- When you have no idea on the equipment you have for your swimming pool.
How to drain pool with a pool pump?
The easiest type of pool to drain is a concrete swimming pool. Generally, these types of pools are not complicated to drain and you may not need the help of a professional or a friend. A standard garden sump pump will be needed for this task. A submersible sump pump can also be rented if you do not own a garden sump pump. The first thing to do is to find the sewer and drain pipes. Once you located these, you should connect it to the pump using a garden hose and open the hydrostatic valve. Then, make sure the water pump hose is positioned at the deepest portion of your swimming pool. You can start draining the water from your swimming pool once you have done the preceding steps. Make sure to remain on top of the entire operation and stop it whenever necessary. But, before you do anything, make sure you are aware of the discharge rates allowed in your municipality. Allowable discharge rates vary from one place to another. It may even go as low as around 12 gallons per minute. Since most of pool pumps can discharge at around 50 gallons per minute, it will definitely exceed these limits. Due to this, check the laws to avoid flooding the street in front of your house. These are the steps in using a pool pump to drain water from your swimming pool.
But, you should also be aware of the different kinds of swimming pools since the preceding procedure is not applicable to all of these swimming pools.
Concrete pools are easier to drain compared to vinyl-lined swimming pools. Since the liner of vinyl-lined swimming pools is fragile, it is complicated to drain them. In addition, the vinyl liner may not be strong enough to endure the push of the soil around it when the water is drained, which increases the tendency for it to crack.
Caution: You should not attempt to drain water from a fiberglass swimming pool on your own. These types of pools are designed to hold water all the time. When it is not drained properly, it may crack. Fiberglass pools should be drained by a licensed and trained professional.
How to drain pool without a pool pump?
There may be instances when a submersible pump is not available for you to drain your swimming pool. But, you can drain the pool even without using a pool pump. The first but very impractical way of doing this is using buckets and manually scooping out the water from the swimming pool. This may not be an issue if your swimming pool is small or, at most, moderately-sized. But, you should keep in mind that the water should not be dumped into the street. It will be necessary to find a suitable place to dump the water.
The most practical option is to use a garden hose to drain off the water. You can use the following procedure in draining a swimming pool using only a hose: The first thing to do is to attach one end of the hose to a heavy object to make sure it will remain inside the pool and will not be dragged out of position. Drop the end with the heavy object into the deepest portion of your swimming pool. After this, make sure the hose does not have any twists or knots. If there are twists or knots, make sure you straighten out the hose. It will be necessary for the water to pass through the hose without any hitches when using the water siphon method. This is necessary since the water will be drawn out of the pool using gravity and without using any equipment. To drain the water out of the pool, it will be necessary to put your lips on the other end of the hose before sucking out the water until the water reaches your lips. Do not swallow the water before positioning the hose on the ground. Water will flow throughout the length of the hose until air enters the hose. Once this happens, you can start removing the water manually. This is how you can use a garden hose in draining water from a swimming pool.
You can also rent a trash pump in draining water from a swimming pool. If a submersible pool pump is unavailable to drain water from your large-size swimming pool, you can make use of a trash pump. While the principle is similar to using a submersible pool pump, the power used in draining water is not the same. Before you do anything, check local laws on the discharge rate for water. You can see information with regard to this under the “Steps in using a pool pump in draining your pool” section.
A vacuum pump is another option to a submersible pool pump or a trash pump. It will be necessary to connect the vacuum head with the vacuum pool for this method to work. Water from the pool can be easily drained when you use a vacuum pump together with a discharge hose.
How to drain pool after rain
Rain is a natural weather condition that can ruin a weekend in your swimming pool. Your pool can overflow when heavy rains come. It also has a negative effect on the chemicals you use in your pool and can make it more acidic. Due to this, it is necessary to make sure you work on returning the balance of the chemical levels after the rain. Some chemical levels you need to rebalance include the sanitizer level, alkalinity and pH levels. You can use a pool pump or garden hose to drain the water in case it overflows after the rain. You can check the preceding procedures in draining water using a pump or garden hose to accomplish this. It is also advisable to check if the pool equipment was damaged. Since wind normally accompanies rain, it is also advisable to check the pool for any debris that may have fallen into the pool. This is applicable if the pool was not covered before the rain came. A skimmer can be used to remove any debris in the pool.
How to drain a pool before winter
Owners of swimming pools should follow some procedures in preparing their pools for winter. The first thing you should do is to look into the water chemistry of the pool and making the necessary adjustments. You can do this through the addition of winterizing chemicals while monitoring the calcium and pH levels as well as the alkalinity of the pool. This is important to avoid water stain and prevent the growth of algae. It is also important to remove any insects or other debris from the surface of the water. Once this is done, you should reduce the level of water in the swimming pool since water will expand when it freezes. This can damage the walls of the swimming pool. You can check the steps in draining water using a submersible pump in this article. It will also be necessary to unplug any pool equipment to prevent water from entering them, which can cause damage once the water freezes. The final step in the procedure is to make sure to place the winter pool cover on the swimming pool.
How to drain an inground swimming pool
The steps used in draining an in-ground swimming pool are similar to the steps in draining an above-ground swimming pool. While the general procedure is the same, there are a few differences. It is more complicated to drain in-ground swimming pools since these pools have more equipment. The equipment involved includes filters, hoses and pipes, among others. Above-ground swimming pools normally have a single input and output pipe or hose. These pools also have no main drainage system. Due to this, you should take into account the type of swimming pool you have, whether in-ground or above-ground. You can also check our article showing the steps in draining both in-ground and above-ground swimming pools.